User's Manual

4. Changes or modifications to the device may void FCC compliance
5. Infrequently used radio links should be tested regularly to protect against
undetected interference or fault.
6. RF signals can be affected by metal objects including metal doors or large mirrors.
Care should be taken to avoid these objects during installation as they can interfere
with proper operation.
FCC compliance statement
This device complies with FCC Rules and Regulations as Part 15 devices as well as
Industry Canada Rules and Regulations. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
Conformité Réglementaire
Ce dispositif est conforme à la réglementation de la IC et (Partie 15) de la FCC.
Son fonctionnement est soumis à deux conditions : (1) ce dispositif ne doit pas
causer d’interférences nuisibles, et (2) ce dispositif doit accepter toute
interférence reçue, y compris les interférences pouvant entraîner des conditions
de fonctionnement indésirables.
WARNING: The polarity of the battery must be observed, as shown (See
Figure 4). Improper handling of lithium batteries may result in heat
generation, explosion or fire which may lead to personal injuries. Replace
only with the same or equivalent type of battery as recommended by the
manufacturer.
Batteries should not be recharged, disassembled or disposed of in fire.
Disposal of used batteries must be made in accordance with the waste recovery
and recycling regulations in your area.
Notice to users in California—This Percolate warning applies only to
Manganese Dioxide Lithium cells sold or distributed only in California,
USA. Percolate Material special handling may apply. See
www.dtsc.ca.gov.hazardouswaste/perchlorate.
Warranty Statement: This is shown as an example of the SW warranty
statement and is not meant to imply that this is the warranty for the product.
AT&T may have its own warranty terminology