SDS
Safety Data Sheet
LUPRANATEM20 ISO
Revision date : 2015/10/05
Page: 4/15
Version: 5.2
(30089687/SDS_GEN_US/EN)
4. First-Aid Measures
Description of first aid measures
General advice:
Remove contaminated clothing.
If inhaled:
Remove the affected individual into fresh air and keep the person calm. Assist in breathing if
necessary. Immediate medical attention required.
If on skin:
Wash affected areas thoroughly with soap and water. If irritation develops, seek medical attention.
If in eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water.
Immediate medical attention required.
If swallowed:
Rinse mouth and then drink plenty of water. Do not induce vomiting. Never induce vomiting or give
anything by mouth if the victim is unconscious or having convulsions. Immediate medical attention
required.
Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labelling (see
section 2) and/or in section 11., Eye irritation, skin irritation, allergic symptoms
Hazards: Symptoms can appear later.
Information on: Diphenylmethane-4,4'-diisocyanate (MDI)
Hazards: Respiratory sensitization may result in allergic (asthma-like) signs in the lower respiratory
tract including wheezing, shortness of breath and difficulty breathing, the onset of which may be
delayed. Repeated inhalation of high concentrations may cause lung damage, including reduced
lung function, which may be permanent. Substances eliciting lower respiratory tract irritation may
worsen the asthma-like reactions that may be produced by product exposures.
----------------------------------
Indication of any immediate medical attention and special treatment needed
Note to physician
Antidote:
Specific antidotes or neutralizers to isocyanates do not exist.
Treatment:
Treatment should be supportive and based on the judgement of the
physician in response to the reaction of the patient.
5. Fire-Fighting Measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, carbon dioxide, foam
Special hazards arising from the substance or mixture