SDS

Safety Data Sheet
LUPRANATEM20 ISO
Revision date : 2015/10/05
Page: 14/15
Version: 5.2
(30089687/SDS_GEN_US/EN)
87-9
Reportable Quantity for release: 13,157.9 lb
State regulations
State RTK
CAS Number
Chemical name
NJ
101-68-8
9016-87-9
26447-40-5
Diphenylmethane-4,4'-diisocyanate (MDI)
P-MDI
Methylenediphenyl diisocyanate
PA
101-68-8
9016-87-9
Diphenylmethane-4,4'-diisocyanate (MDI)
P-MDI
NFPA Hazard codes:
Health : 2 Fire: 1 Reactivity: 1 Special:
HMIS III rating
Health: 2¤
Flammability: 1
Physical hazard: 1
16. Other Information
SDS Prepared by:
BASF NA Product Regulations
SDS Prepared on: 2015/10/05
We support worldwide Responsible Care® initiatives. We value the health and safety of our
employees, customers, suppliers and neighbors, and the protection of the environment. Our
commitment to Responsible Care is integral to conducting our business and operating our facilities in
a safe and environmentally responsible fashion, supporting our customers and suppliers in ensuring
the safe and environmentally sound handling of our products, and minimizing the impact of our
operations on society and the environment during production, storage, transport, use and disposal of
our products.
LUPRANATE is a registered trademark of BASF Corporation or BASF SE
IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED
HEREIN ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE , IT IS
PROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECT
PROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE TESTS TO
DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR PURPOSE PRIOR
TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET
FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED
WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED
A PART OF OUR TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY
UNDERSTAND AND AGREE THAT THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION
FURNISHED BY OUR COMPANY HEREUNDER ARE GIVEN GRATIS AND WE ASSUME NO
OBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATION
GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK.
BASF CORPORATION WILL NOT MAKE ITS PRODUCTS AVAILABLE TO CUSTOMERS FOR
USE IN THE MANUFACTURE OF MEDICAL DEVICES WHICH ARE INTENDED FOR
PERMANENT IMPLANTATION IN THE HUMAN BODY OR IN PERMANENT CONTACT WITH
INTERNAL BODILY TISSUES OR FLUIDS.