User manual

Secure Power Ltd

User Manual

16 …………………………………………………………………………………………………………

3. Press for more than 0.5 s but less than 2 s. The following is displayed.

4. Press for more than 0.5 s but less than 2 s. OFF stops flashing.

5. Press or to display ON, which flashes.

6. Press for more than 0.5 s but less than 2 s. ON stops flashing.

7. Press for more than 2 s.

To disable switch to bypass mode:

■

Use the procedure above and select OFF instead of ON.

Output voltage level

To change the output voltage:

Caution: Before changing the output voltage, turn off all loads and ensure they are rated for

the new output voltage.

1. On the front panel, press for more than 2 s.

2. Press or until the following is displayed.

3. Press for more than 0.5 s but less than 2 s. The following is displayed.

characters flash