System information

Monitoring
92
ProSAFE Single Band 802.11n Wireless Access Point WN203
View System Information
The System screen provides a summary of the current wireless access point configuration
settings, including current IP settings and current wireless settings. This information is read
only, so any changes need to be made on other screens.
 To view the System screen:
Select Monitoring > System.
The following table explains the fields of the System screen:
Setting Description
Access Point Information
Access Point Name The NetBIOS name. For information about how to change the default name, see
Configure Basic General System Settings and Time Settings on page 20.
Ethernet MAC Address The MAC address of the wireless access point’s Ethernet port.
Wireless MAC Address
for 2.4GHz
The MAC address of the wireless access point’s 2.4 GHz radio.