System information

Management
65
ProSAFE Single Band 802.11n Wireless Access Point WN203
The following table explains the fields of the Unknown AP List screen:
Setting Description
MAC Address The MAC address of the unknown AP.
SSID The SSID that the unknown AP is using.
Privacy Indicates whether security is enabled (1 means enabled; 0 means
disabled).
Channel The channel that the unknown AP is using.
Rate The transmit data rate in Mbps of the unknown the AP.
Beacon Int. The interval for each beacon transmission in ms.
# of Beacons The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
Last Seen The time stamp that indicates the time when the most recent beacon was
detected.
3. Click the Save button.
Export the list of unknown APs to a file. A window opens so you can browse to the
location where you want to save the file. The default file name is macList.txt.
4. (Optional) After you have reviewed the list, import the saved list into the Known AP List on
the Rogue
AP screen (see Enable and Configure Rogue AP Detection on page 63).
 To view the Known AP Lists and save it to a file:
1. Select Monitoring > Rogue AP > Known AP List.
The Known
AP List screen displays:
2. (Optional) Click the Refresh button.
The wireless access point detects the access points and populates the Known AP List for
the configured wireless modes.