System information

Management

ProSAFE Single Band 802.11n Wireless Access Point WN203

Enable the Syslog Option

If you have a syslog server on your LAN, the Syslog screen allows you to enable the syslog

option. If syslog is enabled, the wireless access point sends its syslog files to the syslog

server.

 To enable a syslog option:

1. Select Configuration > System > Advanced > Syslog.

The Syslog screen displays:

2. Specify the settings as described in the following table:

Setting Description

Enable Syslog Select the check box to enable the syslog option. By default, the syslog option

is disabled.

Syslog Server IP Address Enter the IP address of the syslog server to which the wireless access point

sends the syslog files.

Port Number Enter the port number that is configured on the syslog server. The default port

number is 514.

3. Click the Apply button.

Enable Rogue AP Detection and Monitor Access Points

This section describes how to use the Rogue AP detection feature to provide more security in

your wireless network.

• Enable and Configure Rogue AP Detection

• View and Save Access Point Lists