System information

Command-Line Reference
121
ProSAFE Single Band 802.11n Wireless Access Point WN203
| |
| |-radius> --RADIUS server settings
| | |-primary> --Primary RADIUS server
| | | |-auth port> --Authentication port
| | | |-auth secret> --Authentication Shared secret
| | | |-auth server> --Authentication server
| | | |-acct port> --Accounting port
| | | |-acct secret> --Accounting Shared secret
| | | |-acct server> --Accounting server
| | |
| |
| | |-secondary> --Secondary RADIUS server
| | | |-auth port> --Authentication port
| | | |-auth secret> --Authentication Shared secret
| | | |-auth server> --Authentication server
| | | |-acct port> --Accounting port
| | | |-acct secret> --Accounting Shared secret
| | | |-acct server> --Accounting server
| | |
| |
| |-remote> --Remote access settings
| | |-ssh --Enable remote access via SSH
| | |-telnet --Enable remote access via Telnet
| |
| |-snmp-setting> --SNMP settings
| | |-read community --SNMP Read Community
| | |-read-write community --SNMP Read Write Community
| | |-snmp-status --SNMP status
| | |-trap community --SNMP Trap Community
| | |-trap server --SNMP Trap Server IP address
| | |-trap-port --SNMP Trap port
| |
| |-spanning-tree status --Enable spanning tree protocol
| |
| |-syslog> --Syslog setting
| | |-port --Syslog server port number
| | |-server --Syslog server IP address
| | |-status --Enable syslog client
| |
| |-time-settings> --Time Setting
| | |-ntp> --NTP sever settings
| | | |-client --Client enable
| | | |-custom-server --Custom server enable
| | | |-server --Server host name
| | |
| | |-timezone --Time zone
| |
| |-vlan> --VLAN settings
| | |-management-vlan --Management VLAN id
| | |-untagged-vlan id --Untagged VLAN id
| | |-untagged-vlan-status --Untagged VLAN status
| |
|