System information

Command-Line Reference
120
ProSAFE Single Band 802.11n Wireless Access Point WN203
| | | | | |-authentication 8021x --Select wireless 802.1X authentication
| | | | | | type
| | | | | |-authentication open encryption --Select wireless open encryption
| | | | | | authentication type
| | | | | |-authentication shared-key encryption --Wireless shared-key encryption
| | | | | |-broadcast --Broadcast enable
| | | | | |-dynamic-vlan --Dynamic VLAN id
| | | | | |-key-index> --WEP key index
| | | | | | |-1> --Key 1
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | | |-2> --Key 2
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | | |-3> --Key 3
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | | |-4> --Key 4
| | | | | | | |-wep-key --Wireless WEP key
| | | | | | |
| | | | | |-name --Profile name
| | | | | |-security-separation --Disable associated wireless client
| | | | | |
communication
| | | | | |-ssid --Network name (1-32 chars)
| | | | | |-vlan --VLAN id
| | | | | |-wpa-passphrase --Wireless WPA passphrase
| | | | |
| | | |
| | | |
| | | |-wmm> --WMM settings
| | | | |-enable --WMM enable
| | | | |-parameter> --Qos parameter
| | | | | |-ap> --AP
| | | | | | |-queue> --Queue
| | | | | | | |-0 --Access point best effort voice data
| | | | | | | |-1 --Access point low-priority data
| | | | | | | |-2 --Access point video data
| | | | | | | |-3 --Access point voice data
| | | | | | |
| | | | | |-sta> --Station
| | | | | | |-queue> --Queue
| | | | | | | |-0 --Station best effort voice data
| | | | | | | |-1 --Station low-priority data
| | | | | | | |-2 --Station video data
| | | | | | | |-3 --Station voice data
| | | | | | |
| | | | | |
| | | | |-powersave --WMM power save enable
| | | |
| | |