Use & Care Guide

Cover
Plate
Sensor
Light Control
Cover Plate
Gasket
© 2009 HeathCo LLC 598-1343-01
Requirements
• Thelightcontrolrequires120-voltsAC.
• Thisxtureisdesignedforwallmountingonly.
• IfyouwanttouseManualOverride,thecontrolmust
bewiredthroughaswitch.
• Some codes require installation by a qualified
electrician.
• Thisproductisintendedforusewiththeenclosed
gasketandwithajunctionboxmarkedforuseinwet
locations.
• Thebackplatehasknockoutssothesensorcanbe
mountedonmostjunctionboxes.
• Insomeapplicationsauniversaladaptorplatemay
beneeded.AdaptorsareavailableatHomeCenters
andElectricalSupplyStores.
S-hook
1 Halogen
Lamp
ModelSH-5311
3 Wire
Connectors
6Screws
(3sizesincluded)
Thispackageincludes:
OPERATION
*resetstoAutoModeatdawn.
TEST
10 5 1 TEST
ON-TIME
Put the ON-TIME switch on the
bottomofthesensorintheTEST
position.
MANUAL MODE
ON-TIME
10 5 1TEST
...backon.
AUTO
1SecondOFF
then...
Note:Whenrstturnedonwaitabout1
1
/
2
minutesfor
thecircuitrytocalibrate.
Manual mode only works at night
becausedaylightreturnsthe sensor
toAUTO.
Flipthelightswitchoffforonesecond
thenbackontotogglebetweenAUTO
andMANUALMODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
PuttheON-TIMEswitchinthe1,5,
or10minuteposition.
Mode: On-Time: Works: Day Night
Test
5Sec x x
Normal
1,5,10min. x
Manual
UntilDawn* x
Features
• Turnsonlightingwhenmotionisdetected.
• Automaticallyturnslightingoff.
• BulbSaver™-Extendsbulblifebyupto4xstandard
bulbs.Lightsbulbtofullbrightinunder2seconds.
• Photocellkeepsthelightingoffduringdaylighthours.
• LEDindicatesmotionwassensed(dayornight).
Professional Motion Sensor
Quartz Security Light