Use and Care Guide

3
200478-02
INSTALL UNIVERSAL MOUNTING
BRACKET
EstimatedInstallationTime:30minutes
Itemsneededforinstallation(notincluded):
• Phillipsandatheadscrewdrivers
• Pliers • Wirestrippers/cutters
• Safetyglasses • Lightbulb
• Siliconcaulk
Forbestperformance,mountthextureatleast
8feet(2.4m)abovetheground.
FixtureScrew(Tightened
Finger Tight)
Junction Box
UniversalMounting
Bracket
JunctionBoxScrew
WIRING LIGHT FIXTURE
1. Connectthejunctionboxwiresandthexture
wirestogetherasshowninthefollowingdia-
grams.
CAUTION: DO NOT remove wire connec-
tor from RED wire or connect the RED wire
unless you want to control other lights from
this motion sensor fixture.
Note:Ifyouhaveametaljunctionboxusetherecom-
mendedgroundingmethodshowninthefollowing
illustration.Ifyouareuncertainaboutthegrounding
method, consult your local building code.
2. Twistandsecurewireswithwirenuts.
GroundScrew
White to White
Black to Black
Recommended Grounding Method
Metal Junction
Box
Pigtail(not
supplied)
Fixture Bare
GroundWire
BareGroundWire
1. Tightenthetwoxturescrewsngertight.
2. Attachuniversalmountingbrackettojunction
boxsecurelywiththetwoscrewsprovided.
WARNING: Turn power off at circuit
breaker or fuse.