User`s guide

Introduction
1.3.2
Configuring a Sample Setting
This section explains how to configure a s ample setting of a Webwasher fea-
ture. The feature chosen here for explanation is the Animatio n Filter.
In order to avoid the download of bandwidth-consuming animated images, this
filter detects and modifies or removes them.
For this sample setting, just suppose you want to enable the filter and let it
remove any such images from the filtered objects. You also want these settings
to be part of your default filtering policy.
The following overview shows the main steps you need to complete in order to
configure the feature in this way:
Animation Filter – O verview
Step 1 Navigate to the section.
2 Config ure settings.
3 Make settings effective.
In more detail, these steps include the following activities:
1. Navigate to the section
a. Select the Common t
ab:
b. In the navigation area on the left, select Advertising Filters,whichis
located under Policy:
def
aultis selected in the line below Policy. Since you want these s ettings
to be part of your default filtering policy, you can leave this selection as it
is.
1–5