User`s guide

Home
The default interval is 240 minutes. Entering 0 here means that no e-mails
will be sent automatically.
E-mails can be sent manually, however, using the Queue Management
page, which is launched after clicking on the See Content of Queue link
next to the drop-down list.
On this page, click on the button labeled Send All to SecureLabs now
to send the e-mails.
Spam False Negatives Feedback Queue
The Spam False Neg atives Feedback Queue section looks like this:
Using this section, you can configure the sending of feedback in order to im-
prove the spam filter.
You can send e-mails that have erroneously not been classified as spam to an
address that is configured in this section. After e-mails with this address have
been received in the inbound queue of your Webwasher instance, they will be
moved from there to the false negatives queue and later be sent to Secure
Computing.
This feature is not enabled by default. If you would l ike to help improve the
spam filter, please mark the checkbox next to the section heading.
After specifying this and other settings of this section, click on A pply Changes
to make your settings effective.
Use the following items to configure the false negatives feedback:
• SMTP queue to use
From this drop-down list, select an e-mail queue. After being received
in the inbound queue, an e-mail with the address specified further below
will be moved to this queue as false negative and later be sent to Secure
Computing.
The queue should be used for no other purpose than that of collecting false
negatives since it will be cleared after e-mails have been sent off.
To see the e-mails that are in this queue, click on the See Content of
Queue link next to the drop-down list.
2–13