User`s guide

SSL Scanner
To add an exception to the list, use the area labeled:
• Add new exception
In the input field provided here, enter the exception you want to add to the
certificate list.
https:// has been entered in this field a s default information at the begin-
ning of an exception name. The input format for its remaining parts is:
host [:port]
Furthermore, configure the following methods for a new exception:
— by certificate
Enabling the by certificate method means that the certificate issued
for the host you are adding as an exception is checked by the verifica-
tion process.
After enabling this method, select an action from the drop-down list
provided here.
For the meaning of these actions, see the following table:
by certificate by host
Allow Theexceptionisallowed. not available
Block The exception is blocked. The exception is blocked.
Tunnel The a ctivities of the SSL
Scanner are bypassed and
no verification process is
executed.
The activities of the SSL
Scanner are bypassed and
no verification process is
executed.
Warn Incident T he exception is allowed, but
a warning is di splayed.
not available
Only Cert
Checking
not available The content p r ovided by the
host you are adding as an
exception is not decrypted,
and the exception is allowed.
Note: In this case, the
certificate will be ch ecked.
Only
Decryption
not available The content p r ovided by the
host you are adding as an
exception is decrypted, and
the exception is allowed.
4–12