User manual

Click Wireless Configuration. Enter an appropriate ESSID and select a Channel for

your wireless network. Enable Bridge Between Clients to allow wireless clients to

intercommunicate, and there is generally no reason not to Broadcast ESSID. Take note

of the ESSID and Channel, you need them to configure the wireless clients.

Select WPA-PSK as the Security Method, select AES for WPA Encryption if your

wireless clients support it, otherwise select TKIP. Enter a WPA Key of 8 to 63 ASCII

characters, or 64 hexadecimal characters. Take note of the WPA Key and WPA

Encryption method, you need them to configure the wireless clients.

Click Apply. Click ACL.

Network Setup