User manual

Recall that a connection level is one or more connections. These connections may be

marked as Required or Enabled. Internet connections that are marked Disabled are not

part of this connection level. A connection level is deemed to be up when all connections

marked Required at that level are up, and at least one connection (marked Required or

Enabled) at that level is up.

On the Network Setup page, click the Failover & H/A tab, then Modify Levels. A table

is displayed listing each of the connections alongside a drop down box for each

connection level.

Note

If a connection is marked <Always Up>, you must edit its connection parameters as

described by the previous section before it can be associated with a connection level.

First, configure the Primary connection level. If you have a single Internet connection

only, setting it to Enabled or Required has the same effect. For failover to occur, you

must then configure at least the secondary connection level. Click Finish.

Network Setup