User manual

PPTP

To configure a PPTP connection to your ISP, enter the PPTP Server IP Address and a

Local IP Address and Netmask for the SnapGear network port through which you are

connecting to the Internet.

The Local IP address is used to connect to the PPTP server and is not typically your

real Internet IP address. You may also enter a descriptive Connection Name if you

wish. Click Finish or Update.

DHCP

DHCP connections may require a Hostname to be specified, but otherwise all settings

are assigned automatically by your ISP. You may also enter a descriptive Connection

Name if you wish. Click Finish or Update.

Manually assign settings

For Manually Assign Settings connections, enter the IP Address, Subnet mask, the

Gateway and the DNS Address provided by your ISP.

Network Setup