User manual

Note
If autodetection fails, it may be because your DSL modem is misconfigured for your
connection type, or your DSL service has not yet been provisioned by your telco.
Click Next to continue.
PPPoE
To configure a PPPoE or PPPoA connection, enter the user name and password
provided by your ISP. You may also enter a descriptive Connection Name if you wish.
Click Finish.
By default, PPPoE connections are treated as “always on” and are kept up continuously.
Alternatively, you may choose to only bring the connection up when PCs on the LAN,
DMZ or Guest network (via a VPN tunnel) are trying to reach the Internet. For
instructions, refer to the section entitled Dial on Demand further on in this chapter. As
DSL connections are not generally metered by time, this is not generally necessary.
51
Network Setup