User manual

Enter this address as the IP Address, and the subnet mask for your LAN as the Subnet

mask.

Ensure DHCP assigned is unchecked

You may also enter one or more DNS Server(s) and a Gateway address to be used by

the SnapGear unit, not your PC, for access to the Internet. Typically this is not

necessary, as only your PC needs to access the Internet.

Click Update.

Next, configure your PC with the second IP address in the same manner you would as if

it were connected to the LAN with a regular network interface card.

Click Start > (Settings >) Control Panel and double-click Network Connections.

Right-click Local Area Connection (or appropriate network connection for the newly

installed PCI appliance) and select Properties.

Select Internet Protocol (TCP/IP) and click Properties.

Getting Started