User manual

Note

The new password takes effect immediately. You are prompted to enter it when

completing the next step.

In the row labeled Bridge, click the Modify icon.

Note

The purpose of this step is to configure the IP address for the web management console.

For convenience, this is generally a free IP address on your LAN.

 If your LAN has a DHCP server running, you may set up the SnapGear unit and your

PC to obtain their network settings automatically. Proceed to Automatic configuration.

 Otherwise, you must manually specify network settings for both the SnapGear unit

and your PC. Proceed to Manual configuration.

Automatic configuration

Before continuing, ensure your DHCP server has two free leases. One is used for the

web management console, the other for your PC.

Note

It is strongly recommended that you reserve the IP address to be used by the web

management console using the SnapGear unit’s MAC address. In bridged mode, this is

the top MAC address of the three displayed on the SnapGear unit itself.

Getting Started