User manual

Set up the SnapGear unit’s Internet connection settings

Choose a port on the SnapGear unit for your primary Internet connection. Port C is used

in this guide. Attach Port C to your modem device or Internet connection medium. If

necessary, give the modem device some time to power up.

Note

If you have changed the SnapGear unit’s LAN connection settings, browse to the new

LAN IP address.

Select Network Setup from the Network Setup menu.

In the row labeled Port C, select your Internet connection type from the Change Type

drop down list.

 If you are connecting using a Cable Modem, select your ISP, or Generic Cable

Modem Provider if yours does not appear.

 If you are connecting using an ADSL modem, select Auto detect ADSL connection

type, click Next, then enter the details provided by your ISP. If auto detection fails,

you must manually select your ADSL connection type – if you are unsure of this,

contact your ISP.

Getting Started