User manual

Enter a User name (login name), an optional Description, and enter and confirm a
Password.
For dial-in, PPTP and L2TP users, you may also optionally enter a Domain name if your
network has a Windows domain server.
You may specify the following access controls for each local user.
The Dial-in Access control provides the user with the authority to connect to the
SnapGear unit’s dial-in server.
The PPTP Access control provides the user with the authority to connect to the
SnapGear unit’s PPTP VPN server (see the PPTP VPN Server section of the chapter
entitled VPN).
The L2TP Access control provides the user with the authority to connect to the
SnapGear unit’s L2TP server (see the L2TP VPN Server section of the chapter
entitled VPN).
The Internet Access (via. Access Controls) control provides the user with the
authority to connect to the Internet, subject to the restrictions defined on the Access
Control page (see the Access Control section of the chapter entitled Firewall).
The Change Password control provides the user with the ability to change their
password.
Click Finish to apply your changes.
RADIUS
The SnapGear unit may be configured to access a central repository of users and
passwords on a RADIUS server to authenticate dial-in, PPTP VPN server and L2TP VPN
server connections.
Enter the RADIUS Server address from which to obtain client authentication information.
Enter the RADIUS Server Port. This is usually port 1812, however some older RADIUS
servers use port 1645.
Enter and confirm the RADIUS Secret used to access the RADIUS server.
Click Submit to apply your changes.
277
System