User manual

Click Start > (Settings >) Control Panel and double-click Network Connections (or in

95/98/Me, double-click Network).

Right-click Local Area Connection then select Properties.

Note

If there is more than one existing network connection, select the one corresponding to the

network interface card to which the SnapGear unit is attached.

Select Internet Protocol (TCP/IP) and click Properties (or in 95/98/Me, TCP/IP > your

network card name if there are multiple entries) and click Properties.

Select Use the following IP address and enter the following details:

IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Default gateway: 192.168.0.1

Select Use the following DNS server addresses and enter:

Preferred DNS server: 192.168.0.1

Getting Started