User`s manual

Mobile Camera SG550M series 2 Cautions
2 Cautions
The working voltage of the camera is 6V. The camera is supplied by four or eight
AA batteries.
Please install batteries according to shown polarity.
Please unlock the write-protect before inserting the SD-card.
Please insert the SD-card when the power switch is at OFF position before testing
the camera. The camera has no internal memory for saving images or videos. If no
SD-card is inserted, the camera will shut down automatically after a continuous
indication sound.
Please do not insert or take out the SD-card when the power switch is at ON
position.
It is recommended to format the SD-card by the camera when used at the first
time.
The camera will be in USB mode when connected to a USB port of a computer. In
this case, the SD-card functions as a removable disk.
In the TEST mode, the camera will shut down automatically after 3 minutes if no
operation is done. Please turn on the power again if you want to continue to work
with the control.
Please ensure sufficient power when having firmware upgrade, otherwise the
upgrade process could be interrupted incorrectly. If any fault occurs after improper
upgrading process, the camera may stop function properly.
!
Page 5