User manual

Getting Started
39
Select Internet Protocol (TCP/IP) and click Properties.
Enter the following details:

IP address is the second free IP addresses that is part of the subnet range of your
LAN.

Subnet mask is the subnet mask of your LAN.

Default gateway is the IP address of your LAN’s default gateway.

Preferred DNS server is the IP address of the DNS server used by PCs on your
LAN.
Click OK.
Attach your SG unit’s Ethernet port to your LAN’s hub.
Quick setup is now complete.
Disabling the reset button on your SG PCI appliance
For convenience, the SG unit ships with the rear panel Reset button enabled. This
allows the SG unit’s configuration to be reset to factory defaults.