Specifications
SSG 500-series Installation and Configuration Guide
12 Front Panel
Ethernet Port LEDs
The Ethernet LEDs show the status of each Ethernet port. Figure 3 displays the
location of the LEDs on each Ethernet port.
Figure 3: Activity Link LEDs
Table 3 describes the Ethernet port LEDs.
ALARM Red On steadily Critical alarm:
Failure of hardware component or software
module
Firewall attacks detected
Amber On steadily Major alarm:
Low memory (less than 10% remaining)
High CPU utilization (more than 90% in use)
Session full
Maximum number of VPN tunnels reached
HA status changed or redundant group member
not found
Off No alarms
HA Green On steadily Unit is the primary (master) device
Amber On steadily Unit is the secondary (backup) device
Off High availability not enabled
Table 2: Device Status LED Descriptions (Continued)
Name Color Status Description
Table 3: Ethernet Port LEDs
Name Function Color State Description
LINK Link Green On steadily Port is online
Off Port is off line
TX/RX Activity Green Blinking Port is receiving data
Off Port might be on, but it is not receiving data
LINK
TX/RX