Hardware manual

80-001113 SysLINK Administrator’s Guide Page 60
You can also use the r4000 host utility –s or –t options. –s gets the current contents of the
trace log then quits and –t gets the log continuously.
Serious System Error Codes
If your gateway encounters a serious system error, it will display an error condition on the
status LED and attempt to log an error code to the system log. For more information on the
LED conditions, see the Hardware Manual.
The error message recorded to the system log will look similar to the following:
382 log-error[10]: Serious system error 1
The serious system error codes are defined in Table 3-1.
Error Code
Meaning
Action
1
Ethernet MII communication error
Call Systech support
2
Corrupt configuration database.
Restore the default configuration
4
Unknown backplane ID
Call Systech support
8
Unknown network module
Call Systech support
16
Missing or bad DSP device
Call Systech support
Table 3-1: Serious System Error Codes
The actual error code may be a combination (sum) of these.