Hardware manual

80-001113 SysLINK Administrator’s Guide Page 57
Chapter 3: Troubleshooting and
Updating
There are a number of tools built into the gateway to facilitate troubleshooting problems and
managing the unit. These are accessible via the web browser interface under the menu
sections Status and Logs and Commands.
 Troubleshooting displays high level information about transactions
 System Log displays informational and error messages from the unit and can also be
configured to display debug trace data
 OS Task Information displays the state of the onboard software tasks
 Error! Reference source not found. displays the status of network services and current
connections
 Error! Reference source not found. displays the status of the currently active network
interfaces
 Port Status displays the current state of the port(s)
 Log/Debug Settings configures the type of trace data to collect in the System Log
 Ping can be used to test network connections
 Reset/Reboot can be used to clear errors on individual ports or to reboot the gateway
 Flash Management allows you to update the unit’s software, save and update
configuration information, and manage the error history of your gateway