Hardware manual

80-001113 SysLINK Administrator’s Guide Page 23
For each host, select the protocol to use for the connection and the options for that
connection. The available options vary depending on the protocol chosen. You may select
option under either:
 Non-Secure Protocols for Private Networks - The options in this column are only for
use with Private Network connections such as Satellite, Frame Relay or VPN. These
are non-secure protocols.
or
 SSL-Secured Protocols for Internet Connections - The options in this column use SSL
to securely send transactions over public Internet connections. These connections
generally go to SSL gateway sites that have their own private connection to the
payment processors.
To remove a host from the list, select “Delete the protocol settings for this peer”.
Raw or Secure TCP
In Raw or Secure TCP mode, the gateway establishes a TCP connection to the host but does
no additional processing. Data arriving from either the terminal or the host is sent to the
other side as soon as it is detected.