Hardware manual

80-001113 SysLINK Administrator’s Guide Page 22
Protocol Settings
For each host (peer) you will make an outgoing connection to, you need to specify the
protocol options used for that host. For each host, select the Host from the “Select peer to
edit” selection box. Select “Add a new peer definition” link to add a new host.
The hosts are identified by their IP address or Hostname and TCP port (example:
“host.peer.com:443”). You may also specify wild cards. Specific host names and/or port
numbers take precedence over the wild cards. An asterisk for the IP address/hostname (for
instance “*:443”) means any other host when connecting on port 443. An asterisk for the
port number (for instance “host.peer.com:*”) refers to any other port on that host. And a
double asterisk (“*:*”) refers to all other hosts.