Hardware manual

80-001113 SysLINK Administrator’s Guide Page 20
Once you have created an entry in the table, a link to the associated entry on the Protocol
Settings page appears on the right. If the protocol is not yet defined, this link, “Define
protocol”, will create a new entry on the Protocol Settings page, otherwise the link will be
“Edit protocol”.
The translation table screen allows you to add up to 5 new entries at a time. A total of 256
entries may be configured including the default entry.
In the example above, if the attached device dials 18005551212, the port will be connected to
the host at 192.168.1.100 on TCP port 5004. This host is not yet defined, so it will use the
default TCP protocol. If that host is not available, the dial backup port will dial 1-800-555-
5555. If the attached device dials any other number, the port will be connected to
host.testloc.com:5003, whose protocol is defined. And the terminal has actually dialed 555-
1212, generating an automatic, but not yet saved, entry.