Hardware manual

80-001113 SysLINK Administrator’s Guide Page 15
In some instances this functionality can cause inappropriate baud rate changes to be made
that will cause communications to break down. Two additional settings may help prevent
inappropriate changes: “Make autobaud persistent” and “Autobaud Baud Rates”
Checking “Make autobaud persistent” causes the SysLINK to lock in the baud rate once it
has successfully detected it.
“Autobaud Baud Rates” allow you to limit the baud rates that the SysLINK will cycle
between during autobaud detection. This is particularly useful if you know that a device
uses a limited set of baud rates but may change between them during normal operation.