User's Manual

Doc No.: A20470691 Rev. B ECO: 11750 Date: 08/18/2015 11
The ID System was designed to assist your facility nursing staff with the difficult task of managing your infants, patients,
and assets. This system was designed to identify the transmitter, who the transmitter is assigned to, and what door the
transmitter is near. In order for the ID System to provide this valuable information, the Nurse Station must first be
programmed with all this information.
Transmitter
If you are using the Secure Care Software, please complete the following steps:
NOTE: New transmitters need to be added to the transmitter list before they will be
displayed in the transmitter ID drop down menu.
1. Log in to Secure Care Software with your respective User Name and Password.
2. Click on “Admit” and fill out all of the required information following the Hospital Policy and Procedures.
3. Click on the “Admit/Update” button.
4. Click the “Done” button.
5. Log out by clicking the “Log Out” button.
SECTION 3 USING TRANSMITTER WITH SECURE CARE
SOFTWARE
Transmitter ID #
In this example the
transmitter ID # is 0011