User's Guide

Doc. No.: A22270680 Rev.: B ECO: 13058 Date: 04/09/19 8
Intent of the Model 135 STAT
®
ID System
The Model 135 STAT
ID Cutband Transmitter is designed to be placed on the infant’s ankle soon after birth. In the event
the monitored infant is taken near an exit monitored by the Model 135 STAT ID System, the system will arm and/or lock
the door. If the monitored infant is taken through a monitored exit location by an unauthorized person, the system will
sound an audible alarm indicating the exit location through which the infant has been taken.
If the strap of the Model 135 STAT ID Cutband Transmitter is tampered with, resulting in tearing of the conductive traces
within the strap, the Model 135 system will alert nursing staff of the event via an audible and visual alarm condition at the
Nurse Station location. All exit locations monitored by the Model 135 system will arm and/or lock. In the event the door is
open at the exit location, the Model 135 Exit Panel at the exit location will alarm, alerting nursing staff of the event via an
audible and visual alarm at the Nurse Station location.
In the event a cutband alarm condition occurs, existing security procedures should be enacted until staff have located the
infant and cleared the alarm condition.
The Model 135 STAT ID Cutband transmitter is constantly being monitored by the GUI Nurse Station. In the event a
transmitter stops transmitting, the GUI Nurse Station will display a STAT alarm. In the event of a STAT alarm, the infant
and transmitter should be located immediately.
Transmitter Battery Monitoring
This transmitter actively monitors the status of its battery. When the transmitter battery is near the end of its useful life
(less than 2.7v) it will issue a low battery signal that will trigger an audible and visual alert at Secure Care Software
versions 2.8.3 and above. A “Low Battery Alert” will be displayed on the computer. The transmitter should be replaced at
this time. Failure to replace a weak transmitter will compromise performance of the system.
Ordering New or Replacement Transmitters
Transmitters and straps are purchased directly from Secure Care Products. Please call 1-800-451-7917 to order transmitters.
Transmitters and straps will typically be shipped within two weeks after receipt of your order. All transmitter sales are final
because they are date sensitive products. Transmitter straps are sold spools of approximately 62-6 inch straps.
12 Month Transmitter Warranty
Transmitters are warranted for twelve months from date of shipment. The actual expiration date is the last day of the month
engraved on the transmitter. If within the twelve month warranty period a transmitter is not performing to our specification,
CALL our toll free number (1-800-451-7917), for a TXRA (Transmitter Return Authorization) BEFORE returning any
Transmitter.
A replacement transmitter will be sent at a prorated fee (based on the end of the original warranty of the transmitter being
returned) along with a postage paid label marked with a Return Authorization number. Simply replace the suspect transmitter
with the new replacement and send the suspect transmitter back to Secure Care Products within 15 days with facility name
SECTION 2 POLICY AND PROCEDURES
Figure 2-1 13.56 Infant Cutband with
STAT ID transmitter