User's Guide

Doc. No.: A22270680 Rev.: B ECO: 13058 Date: 04/09/19 13
The Model 135 ID System was designed to assist your facility nursing staff with the difficult task of managing your residents,
infants, and assets. This system was designed to identify the transmitter, who the transmitter is assigned to, and what door
the transmitter is near. In order for the Model 135 ID System to provide this valuable information, the system must be loaded
with the transmitter information and assigned to a patient.
NOTE:
New transmitters must be added to the transmitter list before they will be displayed in the
transmitter ID drop down menu.
Refer to the software user guide for loading new transmitters into the system.
1. Log in to Secure Care Software with your respective User Name and Password.
2. Click on “Admit” and fill out all of the required information following the Hospital Policy and Procedures.
3. Click on the “Admit/Update” button.
4. Click the “Done” button.
5. Verify the infant is listed in the currently admitted window.
6. Log out by clicking the “Log Out” button.
SECTION 3 USING TRANSMITTER WITH SECURE
CARE SOFTWARE