User's Guide

SECTION 2 POLICY AND PROCEDURES
Doc. No.: A22270680 Rev.: B ECO: 13058 Date: 04/09/19 12
Alarm Procedures
1. If the Exit System is in alarm:
 Identify the location of the alarm shown on display computer monitor or the nurse station.
 Follow the hospital Policy and Procedure.
2. If one or more cutband zones are in alarm with an infant’s name and room number:
 Go to the area of the alarm condition and locate the baby.
 Follow the hospital Policy and Procedures.
3. If the transmitter has not been cut off the infant or the strap looks intact:
 Verify that the transmitter strap is not too tight on the infant
 Excess strap has been removed.
4. If the transmitter passes the visual test and the system is still reporting a cutband alarm:
 Remove the transmitter by cutting the strap.
 Replace the strap on the transmitter and re-apply the transmitter to the infant.
 Verify that the alarm has been silenced.
 If the transmitter is still in alarm,
 Put the transmitter to sleep and remove it from infant.
 Replace the transmitter with a different one and verify the alarm is clear.
 Store the old transmitter in a storage box for later testing.