User Manual

Recharging your Electric Wine Opener

Plug one end of the adapter cord into the base of the charging stand

and the other end into a main socket. Place the Electric Wine Opener

into recharging stand ensuring that it is ﬁ rmly in position and that it is

fully engaged with the recharging connection. You will notice that the

LED light illuminates. It will take approximately 6-8 hours to recharge

your electric Wine Opener. When your Electric Wine Opener is fully

recharged it can be used to open approximately 30 bottles.

Operate Your Electric Wine Opener

The Electric Wine Opener is operated by one single switch. The switch

has two functions. Press the lower part of the switch to remove a cork

from a bottle. After you have removed the cork from the bottle, press the

upper part of the switch to release a cork from the mechanism.

Before remove the cork you must remove any foil from the bottle using

the cutter provided. (see Fig.1)

1 Place the Electric Wine Opener on top of the wine bottle making

sure that it remains as upright as possible at all times. If you hold the

Electric Wine Opener at an angle to the bottle it will not remove the cork

properly. (Fig 2)

2 Hold the Electric Wine Opener ﬁ rmly and depress the lower part of the

switch. The corkscrew spiral will turn in a clockwise direction and enter

the cork, then gradually remove it from the bottle. When the Electric

Wine Opener mechanism has stopped the cork has been fully removed

from the bottle. (Fig 2)

Operating Instructions

Figure 1

Figure 2

We recommend that you charge your electric Wine Opener for at least 8 hours before using it

for the ﬁ rst time.

Please follow the instructions below for recharging your Electric Wine Opener:

Electric Wine Opener