User`s manual


Install an eyepiece adapter that fits the camera before using this product.
9
1. Attach the eyepiece adapter to the main body of ZIGVIEW by using
the supplied screw driver and four screws.
2. Not fully tightening the screws may cause damage to the product if there is a loose
connection between the main body and the camera. Fastening screws too tightly
may damage threads of screws.
3. Apply appropriate force to fasten 4 screws evenly, just enough to secure the adapter.
□Extra screws are provided. If you lose the extra screws, please contact
your local distributor or sales representative.
□After attaching eyepiece adapter and installing the ZIGVIEW
to the camera, focus the image on ZIGVIEW by controlling diopter dial
or lever of the camera.
Before Using This Product