User`s manual

40
Troubleshooting
■Images on the camera view finder are shown partially or too small.
☞If you first use the product or the values are set at factory or a connected camera
is changed, you have to adjust the screen size to the camera to be used. Please
refer to the manual and adjust the size of images.
■The product is not working even after the power switch is turned on.
☞The product does not work if the battery is not charged. Neither does it work when
the battery is exhausted. When the product does not work after charging the battery
for certain hours, please call the nearest service center.
■Battery is not charged even though the adapter is connected.
☞Please check whether the light of the charging lamp is on. Check the connection of
the charger and if the battery is not charged after certain hours, please call the
nearest service center.
☞Warranty period of the supplied battery is six months. The performance of the
battery can be degraded when it is neglected or is not used for a prolonged time.
■The button cannot be pushed or is malfunctioning.
☞The buttons installed in the product are elaborated devices. If you apply excessive
force, it may cause malfunctioning. Please push the center of button carefully.
■Images do not appear p
☞Look over the connection between the image sensing part and the display part.
Loose connection makes the image noisy or distorted.
☞Please power off before you connect or disconnect the image sensing part and
the display part of ZIGVIEW.
■ZIGVIEW does not work even though AC adapter is connected.
☞ZIGVIEW does not work only with AC adapter. For proper operation, battery must be
installed even though AC adapter is connected.
■Camera shutter is not released in interval shot mode
☞Look over the proper connection of release cable. If shutter is not released even
though proper connection, please change the release cable.