User`s manual
37
Images on Zigview can be displayed on the external video monitor.
1. Connect the video cable between video out connector of Zigview and video
in connector of monitor. External monitor must have an external video input
connector.
2. After a moment, the image will be appeared on the external monitor.
3. If you can not see any images on monitor, please check the cable connection or
input selection of the external monitor.
4. Zigview supports various standards of NTSC and PAL. Proper standard
corresponding to the monitor must be selected in General Setup.
□ Proper video cable must be used for external video out
function.
Connecting External Monitor