User`s manual

Interval Shot (Advanced)
31

10.Load and Save : Load and save setting parameter values. If you want to save current
parameter values to memory, select one of 3 banks, save1, save2 and save3, then
press the Enter button. If you want to load previously saved parameter values, select
one of 3 banks, load1, load2, and load3, then press the Enter button. Load1, load2,
load3 correspond to save1, save2, save3.

1. Set whether beep sound is produced or not.
2. Pressing the Up button makes the beep sound ON
or OFF in turn.
3. Sound ON/OFF can be set during STOP, PLAY
or PAUSE.
1
Total 00:00:10 Remained 000010
Next Shot 00:00:42.7
Sound ON Rest Time 00:01:10
PLAY 000002

1. Interval shot may not operate in some combinations
of setting values. ERROR is displayed instead of PLAY
immediately after interval shot play. Proper parameter
values must be set correctly.
1
Total 00:00:10 Remained 000010
Next Shot 00:00:42.7
Sound ON Rest Time 00:01:10
Error 000002
Ex) In the case of 3 seconds of shot interval, 2 exposures per shot, and 2 seconds
of B shot duration, 3 seconds of shot interval is too short interval because
2 exposures multiplied by 2 seconds of B shot is 4 seconds.