User`s manual

Interval Shot (Advanced)

28
It is possible to set the details of interval parameters. Various interval setting
methods are provided.
1. Move to the mode selection screen by pressing
the Esc button in any modes.
2. Select Interval Shot (Advanced) item, then press
the Enter button.
3. Interval Shot (Advanced) screen will be displayed
with previously used parameters.

1. Operation Status : indicates the operation status of Interval Shot (Advanced).
2. Number of Shots in Progress : indicates the number of interval shots in progress.
3. Shot Interval : indicates shot interval.
4. Total Number of Shots : indicates the total number of shots.
5. Sound : indicates whether beep sound is produced or not.
6. Title/Status of Progress : If the operation status is stop, this field displays
the title of Interval Shot (Advanced). If it is play or pause, this field displays
the residual time to the next shot and the residual time to the end of interval shot
Operation Mode selection (1.1)
□ Digital View Finder
□ Interval Shot(Simple)
□ Long Exposure(Bulb)
□ Long Exposure(Time)
□ Interval Shot(Advanced)
□ Motion Sensing Shot
□ General Setup
Operation Status
Total Number of Shots
Sound
Title/Status of Progress
Number of Shots in Progress
Residual Number of Shots
Total 000010 Remained 000010
**** Interval Shot *****
Sound ON ***** ( Simple ) *****
STOP 000000
2

1. Pressing the Enter button plays interval shot, then
STOP is changed to PLAY. At the bottom of LCD,
the residual time to the next shot and the residual
time to the end of interval shot will be displayed.
2. Pressing the Enter button during PLAY suspends
the progress of interval shot, and displays PAUSE.
Pressing the Enter button again resumes play.
3. Pressing the Esc button during PLAY or PAUSE stops interval shot.
Total 00:00:10 Remained 000010
Next Shot 00:00:42.7
Sound ON Rest Time 00:01:10
PLAY 000002
1