User`s manual

Long Exposure(Time Shutter)

27
Time shutter mode releases the shutter of the camera connected to the
ZIGVIEW for arbitrary time. The shutter speed of the camera must be B
for proper operation.
1. Move to the mode selection screen by pressing
the Esc button in any modes.
2. Select Time Shutter item, then press the Enter button.
3. Time Shutter screen will be displayed.
Operation Mode selection (1.1)
□ Digital View Finder
□ Interval Shot(Simple)
□ Long Exposure(Bulb)
□ Long Exposure(Time)
□ Interval Shot(Advanced)
□ Motion Sensing Shot
□ General Setup
2

1. Pressing the Enter button plays time shutter, then
STOP is changed to PLAY.
2. Pressing the Esc or Enter button during PLAY stops
time shutter. PLAY is changed to STOP.
Sound ON
PLAY 00:00:02
2
□ If your camera does not support B shutter, the time shutter
may malfunction.

1. Set whether beep sound is produced or not.
2. Pressing the Up button makes the beep sound
ON or OFF in turn.
3. Sound ON/OFF can be set during STOP or PLAY.
Sound ON
PLAY 00:00:02
3
Long Exposure (Tme)
Long Exposure (Tme)