User`s manual

Long Exposure (Bulb shot)

25
Bulb Shot mode releases the shutter of the camera connected to the ZIGVIEW
for assigned time. The shutter speed of the camera must be B for proper operation.
1. Move to the mode selection screen by pressing
the Esc button in any modes.
2. Select Bulb Shot item, then press the Enter button.
3. Bulb Shot screen will be displayed with the previously
used parameters.
Operation Mode selection (1.1)
□ Digital View Finder
□ Interval Shot(Simple)
□ Long Exposure(Bulb)
□ Long Exposure(Time)
□ Interval Shot(Advanced)
□ Motion Sensing Shot
□ General Setup
2

1. Pressing the Enter button plays bulb shot, then STOP
is changed to PLAY.
2. Pressing the Esc or Enter button during PLAY stops
bulb shot. PLAY is changed to STOP.
Sound ON
PLAY 00:00:02
Long Exposure (Bulb)
3
Sound ON
Setup 00:00:02
Long Exposure (Bulb)
2
□ If your camera does not support B shutter, the Bulb Shot mode
may malfunction.

1. Set the time for Bulb Shot.
2. Press the Enter button for about 1 second during
STOP. STOP is changed to SETUP, and the cursor
positions at the first 2 digits, HOUR field.
3. Pressing the Up and Down button changes
the HOUR field.
4. Repeating the pressure of the Enter button moves
the cursor to MINUTE or SECOND field, and you can change the field
by pressing the Up and Down button.
5. After the completion of changing value, repeating the pressure of the Esc button
moves the cursor to Operation Status item, and SETUP will be changed to STOP.