User`s manual

Interval Shot (Simple)

23
In simple interval shot, camera shutter is released according to the number
of total shot and interval time.
1. Move to the mode selection screen pressing Esc
button in any modes.
2. Select the Interval Shot (Simple) item, then press
the Enter button.
3. The Interval Shot (Simple) screen will be displayed
with previously used parameters.

1. Operation Status : indicates operation status of Interval Shot (Simple).
2. Number of Shots in Progress : indicates the number of interval shots in progress.
3. Shot Interval : indicates shot interval.
4. Total Number of Shots : indicates the total number of shots.
5. Sound : indicates whether beep sound is produced or not.
6. Title/Status of Progress : If the operation status is stop, this field displays the title,
Interval Shot (Simple). If it is play or pause, this field displays the residual time
to the next shot and the residual time to the end of interval shot.
Operation Mode selection (1.1)
□ Digital View Finder
□ Interval Shot(Simple)
□ Long Exposure(Bulb)
□ Long Exposure(Time)
□ Interval Shot(Advanced)
□ Motion Sensing Shot
□ General Setup
Operation Status
Shot Interval
Sound
Title/Status of Progress
Number of Shots in Progress
Total Number of Shots
Interval 00:00:10 Shots 000010
**** Interval Shot *****
Sound ON ***** ( Simple ) *****
STOP 000000
2
3

1. Pressing the Enter button plays interval shot, then
STOP in operation status field is changed to PLAY.
At the bottom of LCD, the residual time to the next
shot and the residual time to the end of interval shot
will be displayed.
2. Pressing the Enter button during PLAY suspends
the progress of interval shot, and displays PAUSE.
Pressing the Enter button again resumes play.
3. Pressing the Esc button during PLAY or PAUSE stops interval shot.
Interval 00:00:10 Shots 000010
Next Shot 00:00:42.7
Sound ON Rest Time 00:01:10
PLAY 000002
1