User`s manual

Digital View Finder

21
Digital view finder mode is a basic function
of ZIGVIEW. It assists the shootings in various
positions and angles.
Displays zoomed image on LCD.
1. Move to the mode selection screen by pressing
the Esc button in any modes.
2. Select the Digital View Finder item, then press
the Enter button.
3. No extra information is displayed on the LCD
excluding battery level indicator.
4. The display of the battery level indicator can be
selected in the general setup.

1. The center of image will be zoomed for every press
of Up button with the following order,
1.0 -> 1.25 -> 1.5 -> 1.75 -> 2.0 -> 1.0
2. Zooming factor excluding 1.0 is displayed at the bottom
of the LCD.
3. Zooming is executed only in the digital view finder mode.
Operation Mode selection (1.1)
□ Digital View Finder
□ Interval Shot(Simple)
□ Long Exposure(Bulb)
□ Long Exposure(Time)
□ Interval Shot(Advanced)
□ Motion Sensing Shot
□ General Setup
Zoom 1.5
2
3
3
Adjust LCD backlight. Select the proper value
according to the shooting environment.

1. The brightness of LCD will be varied for every press
of Down button with the range of 1 ~ 5. Brightness
value is displayed for about 1 second at the bottom
of the LCD.
2. After power on, the backlight parameter value of
the General Setup will be loaded.
Brightness 2
3