User`s manual

Basic Operations

13
1. Attach ZIGVIEW to the camera. Power on and confirm sharply out-lined image
on the LCD.
2. If you cannot see sharply out-lined image on the LCD, adjust camera diopter lever
or dial until a sharp out-lined image appears on the LCD.
3. You can refer to the camera user’s manual about the operation of camera diopter
lever or dial .
4. Some cameras may not have diopter lever or dial.
If you cannot see the sharply out-lined image on the LCD after installing of
ZIGVIEW, you can focus the image by adjusting camera diopter lever or dial.
<Nikon D70, D50>
<Nikon D200>
<Canon 300D, 350D>
<Canon EOS 1Ds>
<Minolta 7D>
<Pentax *istDs>
<Nikon D2H, D2X>
Examples of diopter lever or dial