User Instructions

2 Receivers + 2 Sensors (activate either door sensors and both receivers will ring):
Same tones for different sensors (e.g.: sensors a&b activated, receiver A&B makes same sound)
Equivalent to adding another sensor to each of the two receivers
STEPS:
(1) Plug-in the receiver A (B), long press the receiver A (B)“VOLUME” button until the receiver
beeps once;
(2) Separate sensor and magnetic stripe b (a) once, the receiver will beeps twice with LED
indicator flashes 1 second;
(3) Separate sensor and magnetic stripe b (a)once again, the receiver will beeps once with LED
indicator flashes 1 second;
(4) Short press the receiver A (B) "VOLUME" button, done.
Different tones for different sensors (e.g.: sensors a&b activated, receiver A makes sound 1,
receiver B makes sound 2)
Reset the receivers first and then pair the two sensors with two receivers in FIXED - tone Pairing
way;
STEPS:
(1) Reset receiver A&B: Clear All Settings--First unplug the receiver, then long press and hold
"VOLUME" button and plug in the outlet, you will start to hear continuous beeping and the LED
light will flash ten times. Keep on pressing and holding the "VOLUME button until there is no
more sound and light, the receiver and sensors are now all reset.
(2) Sensor a paired with receiver A---Press the receiver "MUSIC" button to select a tone 1 that
you like; Long press the receiver "VOLUME" & "MUSIC" button until led light up; Separate sensor
once, the receiver will beeps twice with LED indicator flashes 1 second; Separate sensor once
again, the receiver will beeps once with LED indicator flashes 1 second; Short press the receiver
"VOLUME" button, done.
(3) Sensor a paired with receiver B---Press the receiver "MUSIC" button to select a same tone 1;
Long press the receiver "VOLUME" & "MUSIC" button until led light up; Separate sensor once, the
receiver will beeps twice with LED indicator flashes 1 second; Separate sensor once again, the
receiver will beeps once with LED indicator flashes 1 second; Short press the receiver "VOLUME"
button, done.
(4) Sensor b paired with receiver A---Press the receiver "MUSIC" button to select an other tone 2
that you like; Long press the receiver "VOLUME" & "MUSIC" button until led light up; Separate
sensor once, the receiver will beeps twice with LED indicator flashes 1 second; Separate sensor
once again, the receiver will beeps once with LED indicator flashes 1 second; Short press the
receiver "VOLUME" button, done.
(5) Sensor b paired with receiver B---Press the receiver "MUSIC" button to select a same tone 2;
Long press the receiver "VOLUME" & "MUSIC" button until led light up; Separate sensor once, the
receiver will beeps twice with LED indicator flashes 1 second; Separate sensor once again, the
receiver will beeps once with LED indicator flashes 1 second; Short press the receiver "VOLUME"
button, done.