Instructions

Testing Process (Vehicle Side)

1) Always plug the transmitter into the vehicle socket ﬁrst. The

Wireless ControlCase is equipped with a transmitter.

OOne transmitter to test a 13-pole +7-pole 12-volt socket. Use the

respective transmitter according to the socket type. When using

the 7-pole transmitter type N, always switch on the vehicle lighting

before the testing process.

2) Get into the vehicle and activate the Wireless ControlCase

through the ON/OFF power button.

3) 3) Now test whether the cabling and the socket connections were

installed properly by operating the individual switches in the

vehicle, e.g. left indicator, brakes, rear fog light etc. In the case of

possible errors, the cabling should be implemented or changed

once again according to the given ISO/DIN connection plan.

Safety Note

•• Make sure that you use the case correctly. Please read the safety

notes and instructions carefully before using the device.

• Please keep these safety notes after reading them.