Instructions

Testing Process (Trailer Side)
1) After activating the Wireless ControlCase through the ON/OFF
button, the testing process can be carried out.
2) Insert your trailer’s plug into the intended…
• 13-pole 12-volt socket
3)3) Activate the transmitter for trailers by inserting the battery.
4) Go to the back of your trailer.
5) By pressing the ON/OFF (red) button and the respective buttons,
the individual trailer lights are switched on.
6) If the trailer symbols of the transmitter match the trailer lights,
the cabling is fine.
7) In the case of possible errors, the cabling should be
imimplemented or changed once again according to the given
ISO/DIN connection plan.
8) If the transmitter does not work (e.g. low battery, transmitter no
longer available), you can carry out an automatic test run by
“pressing” the toggle (autom. test run).
Note: After completing the test run, the battery should be removed
from the sender (energy loss of the battery).